Posted by on 7/31/2019 to Product Information
Iperbet is low RPM job site mixer for mixing grout, thin-set or mud mix at the proper speed, preventing air pockets from entering into the mixture. The unique fixed blade design mixes by rotating the bucket rather than the paddles, allowing you to safely check the mix and pour more product without stopping the mixer. The motor is located beneath the metal shroud, ensuring the unit is balanced at all times and prevents contact with the motor or gears. Mix 50 to 100 lbs. dry powder per load. It comes with two 11.8 gallon buckets and weighs only 75 lbs. With dimensions equaling 21" x 25" x 32", two wheels, and a well-positioned handle, it's an easy way to complete all your mixing needs with less fatigue on the worker.
Raimondi "Maxititina" Floor MachineMaxititina allows you to completely grout a floor without ever having to be on your knees using the 19-inch grouting paddle attachment. Power grouting is quick and easy. Maxititina works with un-sanded, sanded, and most epoxy grouts. Prepared grout is dumped across the tiled area in manageable amounts. Then the Maxititina is used to spread the grout and pack the joint full. Grouting speed is 55 rpm, all other application use 110 rpm. 19" Grouting Paddle sold separately
Berta for grout cleanup (cement-based or epoxy resin haze) from large commercial installations including ceramic, porcelain quarry, brick, and stone. Will not pull grout from the joints. Easy handling, suitable for use even in small areas processing 800 - 1500 SF per hour. 3 sponge roller types available, sanded & unsanded grout, un-sanded, and epoxy. Sponge rollers can last from 1,600 10,000 SF Raimondi "Berta" Electric Grouting Machine moisture level of the sponge roller is adjustable via the pressure adjustment lever. Easy-to-use pressure adjustment lever also adjusts the front wheels. Easy-to-replace sponge roller thanks to the magnetic “quick clutch” system. Water is fed to the roller via a foam-reducing belt (no pump to clog up). The handle folds down for transport or storage, and its ergonomic design is fully adjustable for height and angle according to the user(s) needs. Die-cast aluminum body reduces weight while increasing overall strength. Easy-to-remove water-tank (15 liters, 4 gals.) is made of impact-resistant plastic to reduce breakage. Berta Machine comes standard with: sponge roller for cement-based grout, anti-foaming liquid, user, and maintenance manual.